Lower Control Arm, Removing And Installing: Installing
WARNING: This page is about a different car, the 2022 Volkswagen ID.4 and 2021 Volkswagen ID.4. However, it is still accessible from the selected car via links, so may be relevant.
Install in the reverse order of removal while noting the following:
-- Pay attention that the bracket tab -4- is seated correctly in the subframe -1-.
-- Tighten the threaded connections in curb weight position. Refer to Wheel Bearing, Lifting to Curb Weight Position .
-- Perform the axle alignment. Refer to NEED FOR AXLE ALIGNMENT, EVALUATING .