Rear lid hinge, loosening
WARNING: This page is about a different car, the 2022 Volkswagen ID.4 and 2021 Volkswagen ID.4. However, it is still accessible from the selected car via links, so may be relevant.
-- Loosen the bolts -2-.
-- Push the rear lid in the -direction of the arrow A- or the -direction of the arrow B-.
-- Tighten the bolts -2- by hand.
-- Tighten the bolts -2- to the tightening specification.
-- Check the body gap dimensions using the Gauge - Gap Adjustment: 3371 . For this, pay attention to the BODY REAR .
-- If the rear lid is not correctly adjusted, loosen the hinge from the body (refer to Hinge to Body, Loosening ) and adjust the rear lid.