Bonded Rubber Bushing, Removing And Installing, Final Drive 0BS, 0CR And 0AY: Installing

WARNING: This page is about a different car, the 2023 Volkswagen Arteon. However, it is still accessible from the selected car via links, so may be relevant.

Inserting the "lower" bonded rubber bushing.

-- Insert the bushing until the collar makes contact with the final drive all the way around.

Fig 1: "Lower" Bonded Rubber Bushing, Pulling In

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Inserting the "upper" bonded rubber bushing.

-- Insert the bushing until the collar makes contact with the final drive all the way around.

Fig 2: "Upper" Bonded Rubber Bushing, Pulling In

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Install the plates. Refer to OVERVIEW - SUBFRAME MOUNT, FINAL DRIVE 0BS, 0CR AND 0AY for the component location.