Overview - SUBFRAME Mount, Final Drive 0BS, 0CR And 0AY

WARNING: This page is about a different car, the 2023 Volkswagen Arteon. However, it is still accessible from the selected car via links, so may be relevant.

Overview - Bonded rubber bushing in rear final drive

Fig 1: Bonded Rubber Bushing, Assembly Overview

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

"Upper Rear" Bonded Rubber Bushing
Replace the bonded rubber bushings >>in pairs<< (upper and lower bearings).
- With stop washer
- Refer to the appropriate Electronic Parts Information for the allocation.
- Remove the stop washer for removal and installation
- Removing and Installing. Refer to BONDED RUBBER BUSHING, REMOVING AND INSTALLING, FINAL DRIVE 0BS, 0CR AND 0AY .
"Lower Rear" Bonded Rubber Bushing
Replace the bonded rubber bushings >>in pairs<< (upper and lower bearings).
- Without stop washer
- Refer to the appropriate Electronic Parts Information for the allocation.
- Removing and Installing. Refer to BONDED RUBBER BUSHING, REMOVING AND INSTALLING, FINAL DRIVE 0BS, 0CR AND 0AY .
"Lower Rear" Bonded Rubber Bushing
Replace the bonded rubber bushings >>in pairs<< (upper and lower bearings).
- Without stop washer
- Refer to the appropriate Electronic Parts Information for the allocation.
- Removing and Installing. Refer to BONDED RUBBER BUSHING, REMOVING AND INSTALLING, FINAL DRIVE 0BS, 0CR AND 0AY .
"Lower Front" Bonded Rubber Bushing
Replace the bonded rubber bushings >>in pairs<< (upper and lower bearings).
- With stop washer
- Refer to the appropriate Electronic Parts Information for the allocation.
- Remove the stop washer for removal and installation
- Removing and Installing. Refer to BONDED RUBBER BUSHING, REMOVING AND INSTALLING, FINAL DRIVE 0BS, 0CR AND 0AY .
Rear Final Drive
- Remove to replace the bonded rubber bushing. Refer to FINAL DRIVE, REMOVING AND INSTALLING .
"Upper Front" Bonded Rubber Bushing
Replace the bonded rubber bushings >>in pairs<< (upper and lower bearings).
- Without stop washer
- Refer to the appropriate Electronic Parts Information for the allocation.
- Removing and Installing. Refer to BONDED RUBBER BUSHING, REMOVING AND INSTALLING, FINAL DRIVE 0BS, 0CR AND 0AY .
"Upper Rear" Bonded Rubber Bushing
Replace the bonded rubber bushings >>in pairs<< (upper and lower bearings).
- With stop washer
- Refer to the appropriate Electronic Parts Information for the allocation.
- Remove the stop washer for removal and installation
- Removing and Installing. Refer to BONDED RUBBER BUSHING, REMOVING AND INSTALLING, FINAL DRIVE 0BS, 0CR AND 0AY .