Overview - Pistons And Connecting Rod
WARNING: This page is about a different car, the 2023 Volkswagen Arteon. However, it is still accessible from the selected car via links, so may be relevant.
The overview is described as an example for one piston
- Bolt
- 45 Nm +90°
- Replace after removing
- Quantity: 2
- Connecting Rod Bearing Cap
- With area for label -A- to determine where it belongs
- With locating tab -B- for installation position
- Bearing Shell
- Refer to Connecting Rods, Checking Radial Clearance .
- Refer to Check and Adjustment Values .
- Connecting Rod
- With area for label -A- to determine where it belongs
- With locating tab -B- for installation position
- Refer to Connecting Rods, Checking Radial Clearance .
- Refer to New Connecting Rod, Separating .
- Relief Valve
- 27 Nm
- Oil Spray Jet
- Refer to Oil Spray Jets, Removing and Installing .
- Circlip
- Replace after removing
- Quantity: 2
- Piston Pin
- Piston
- Refer to Pistons, Removing and Installing .
- Refer to Piston and Cylinder Bore, Checking .
- Compression Ring
- Refer to Piston and Cylinder Bore, Checking .
- Quantity: 2
- Oil Scraping Ring
- 3 - Part
- Refer to Piston and Cylinder Bore, Checking .