Part II

WARNING: This page is about a different car, the 2023 Volkswagen Atlas. However, it is still accessible from the selected car via links, so may be relevant.

Part I. Refer to Part I .

Fig 1: Exploded View Of Turbocharger (Part II)

Courtesy of VOLKSWAGEN OF AMERICA, LLC

Bolt
- 9 Nm
Oil Return Line
O-Ring
- Replace
- Coat with engine oil
Bolt
- 10 Nm
Charge Air Pressure Actuator -V465-
- Before removing the Charge Air Pressure Actuator -V465- check that it is available in the appropriate Electronic Parts Information.
- Adjusting. Refer to Charge Air Pressure Actuator -V465-, ADJUSTING .
Nut
- Secure with Mini Torque Wrench:VAS 6854
- 10 Nm
Bolt
- 9 Nm
Connection
O-Ring
- Replace
Bolt
- 9 Nm
Turbocharger Recirculation Valve -N249-
- Note the installation position. Refer to Fig 2.
O-Ring
- Replace
Turbocharger
- Removing and Installing. Refer to TURBOCHARGER, REMOVING AND INSTALLING .
O-Ring
- Replace
- Coat with coolant
Bolt
- 9 Nm
Bolt
- 9 Nm
Bolt
- 9 Nm
Coolant Return Line
O-Ring
- Replace
- Coat with coolant
O-Ring
- Replace
- Coat with engine oil
Bolt
- Coat the thread with hot bolt paste. Refer to the appropriate Electronic Parts Information.
- 30 Nm
Bracket
- For the turbocharger
Bolt
- 30 Nm
Bolt
- 9 Nm
  Turbocharger Recirculation ValveN249 Installation Position
  
  Fig 2: Turbocharger Recirculation Valve -N249- Installation Position
  Courtesy of AUDI OF AMERICA, LLC
  
  -- Note the installation location -arrows-.