Charge Air Pressure Actuator -V465-, ADJUSTING

WARNING: This page is about a different car, the 2023 Volkswagen Atlas. However, it is still accessible from the selected car via links, so may be relevant.

Special tools and workshop equipment required

Mini Torque Wrench:VAS 6854
Vehicle Diagnostic Tester

Removing

-- Loosen the clamp -1- for the catalytic converter -2- and push the clamp on the turbocharger.

Courtesy of VOLKSWAGEN OF AMERICA, LLC

-- Remove the noise insulation. Refer to OVERVIEW - NOISE INSULATION .

-- Remove the nuts -2-.

Courtesy of VOLKSWAGEN OF AMERICA, LLC

-- Remove bolts -arrows- and set the catalytic converter slightly aside.

Fig 1: Identifying Exhaust System Bracket (Suspended Mount) Bolts

Courtesy of VOLKSWAGEN OF AMERICA, LLC

-- Turn on the ignition and select the following menu item on the Vehicle Diagnostic Tester:

Engine control module, functions
0001 - Charge pressure actuator V465 adjusting

-- Adjust the charge air pressure actuator linkage to the instructions in the vehicle diagnostic tester.

-- Tighten the lock nut with the Mini Torque Wrench:VAS 6854 .

Tightening Specifications

Refer to OVERVIEW - TURBOCHARGER