Engine Mount, Removing And Installing
WARNING: This page is about a different car, the 2023 Volkswagen Atlas. However, it is still accessible from the selected car via links, so may be relevant.
-- Disconnect the connector -1-.
-- Release the catches with a screwdriver -arrow-. Place the coolant expansion tank with hoses on the engine.
-- Support the engine in the installation position. Refer to ENGINE, SUPPORTING IN INSTALLATION POSITION .
-- Slightly pretension the engine/transmission assembly with the spindle, do not lift.
-- Remove the bolts -arrows- and engine mount -1-.
Installing
Install in the reverse order of removal while noting the following:
-- Check the adjustment of the subframe mount. Refer to ASSEMBLY MOUNT, CHECKING ADJUSTMENT .
Tightening Specifications
- Refer to OVERVIEW - ASSEMBLY MOUNTS