LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2023 >> ID.4 S >> Repair and Diagnosis >> External Pages >> Different car >> Section 108 (Hood, Lids) >> 55 Hood, Lids >> Rear Lid >> Rear Lid, Adjusting >> Adjusting Buffer, Replacing >> Installing

Adjusting Buffer, Replacing: Installing

WARNING: This page is about a different car, the 2023 Volkswagen Atlas. However, it is still accessible from the selected car via links, so may be relevant.

-- Check the stop -3- for proper seating in the side panel -4-.

-- To install, insert the entire stop buffer -1- at a right angle into the rear lid -2- in direction of -arrow c-.

-- Turn the stop buffer -1- 90° in direction of -arrow b-.

-- Adjust adjusting buffer -1-. Refer to Adjusting Buffer, Adjusting .

scientia non olet · About LEMON Manuals