Sub-Assembly Bracket, Removing And Installing: Removing

WARNING: This page is about a different car, the 2023 Volkswagen Atlas. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the ribbed belt. Refer to RIBBED BELT, REMOVING AND INSTALLING .

-- Remove the Generator --. Refer to GENERATOR, REMOVING AND INSTALLING .

-- Remove the A/C compressor. Refer to A/C COMPRESSOR, REMOVING AND INSTALLING .

-- Remove the ribbed belt tensioner. Refer to RIBBED BELT TENSIONER, REMOVING AND INSTALLING .

-- Remove the bolts -1- and -2-.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Lift the sub-assembly bracket -3- slightly from the engine and remove the After-Run Coolant Pump -- -1- -arrows-.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.