Overview - Exhaust Manifold
WARNING: This page is about a different car, the 2023 Volkswagen Atlas. However, it is still accessible from the selected car via links, so may be relevant.
- Heat Shield Bracket to Cylinder Head
- Bolt
- 20 Nm
- Bolt
- 20 Nm
- Seal
- Bank 1
- Cylinders 1, 2 and 3
- Replace
- Exhaust Manifold
- Bank 1
- Cylinders 1, 2 and 3
- Removing and Installing. Refer to EXHAUST MANIFOLD, REMOVING AND INSTALLING .
- Nut
- 25 Nm
- Replace
- Coat the threads of the stud bolts with hot bolt paste
- Heat Shield
- Bolt
- 20 Nm
- Intake Manifold Support
- Exhaust Manifold
- Bank 2
- Cylinders 4, 5, and 6
- Removing and Installing. Refer to EXHAUST MANIFOLD, REMOVING AND INSTALLING .
- Seal
- Bank 2
- Cylinders 4, 5, and 6
- Replace