Version 1

Fig 1: Exploded View Of Turbocharger (Part II)

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Bolt
- 9 Nm
Oil Return Line
O-Ring
- Replace
- coat with engine oil
Bolt
- 10 Nm
Charge Air Pressure Actuator -V465-
- Before removing the Charge Air Pressure Actuator -V465- check that it is available in the Parts Information.
- Adjusting. Refer to Charge Air Pressure Actuator -V465-, ADJUSTING .
Nut
- Secure with Mini Torque Wrench :VAS6854
- 10 Nm
Bolt
- 9 Nm
Connection
O-Ring
- Replace
Bolt
- 9 Nm
Turbocharger Recirculation Valve -N249-
- Note the installation position. Refer to Figure.
O-Ring
- Replace
Turbocharger
- Removing and Installing. Refer to TURBOCHARGER, REMOVING AND INSTALLING .
O-Ring
- Replace
- Coat with coolant
Bolt
- 9 Nm
Bolt
- 9 Nm
Bolt
- 9 Nm
Coolant Return Line
O-Ring
- Replace
- Coat with coolant
O-Ring
- Replace
- coat with engine oil
Bolt
- Coat the thread with hot bolt paste. Refer to the Parts Information.
- 30 Nm
Bracket
- For the turbocharger
Bolt
- 30 Nm
Bolt
- 9 Nm