LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2018 >> Beetle S, 2D Hatchback >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 25 (Body Front (Convertible)) >> 50 Body Front >> Fender >> Fender Brace, Removing And Installing >> Removing

Fender Brace, Removing And Installing: Removing

WARNING: This page is about a different variant/trim than selected.

-- Remove the front bumper cover. Refer to BUMPER COVER, REMOVING AND INSTALLING .

-- Remove the guide from the front bumper cover. Refer to OVERVIEW - GUIDES AND BRACKETS .

-- Remove the headlamp carrier plate bolt on the fender brace -2-.

Fig 1: Identifying Fender Brace
GWWM50-10064Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the nut that attaches the front fender to the fender brace -2-. Refer to OVERVIEW - FENDER .

-- Remove the bolts -1- and the fender brace -2-.