General Information
WARNING: This page is about a different variant/trim than selected.
Special tools and workshop equipment required
- Battery Charger: VAS5095A
- Test Instrument Set - Current Clamp - 100A: VAS6356/4A
WARNING:
Risk of injury! Pay attention to all warnings and safety precautions. Refer to WARNINGS AND SAFETY PRECAUTIONS .
In order to prevent damage to the Battery -A- or vehicle, note the information about the battery types. Refer to BATTERY TYPES .
WARNING:
Do not check or charge a Battery -A- when the visual indicator has >>no color or is bright yellow<<. Do not give a jump start.
There is a risk of explosion during testing, charging or jump starting.
These Batteries -A- must be replaced.
The charge current cannot be read on the : VAS5095A . The charge current must be measured externally with a current probe (: VAS6356/4A ).
Observe the : VAS5095A Operating Instructions.
- : VAS5095A device description. Refer to Battery Charger .
- Charge the Battery -A-. Refer to BATTERY, CHARGING WITH Battery Charger .
- Severely discharged Battery -A-, charging. Refer to SEVERELY DISCHARGED BATTERY, CHARGING WITH Battery Charger .
- Support mode. Refer to Battery Charger .
- Buffer mode/maintenance charging. Refer to Battery Charger .