Small Coolant Pipe: Installing

WARNING: This page is about a different car, the 2013 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.

Tightening specifications, refer to COOLANT PIPES OVERVIEW .

Install in reverse order of removal. Note the following:

NOTE:

Replace the O-ring.

Only use approved clamps for hose connections. Refer to appropriate service information.

-- Install the charge air hose. Refer to CHARGE AIR HOSE, DISCONNECTING AND CONNECTING .

-- Check the coolant level. Refer to COOLANT, DRAINING AND FILLING .