Relay And Fuse Panels In E-Box

WARNING: This page is about a different car, the 2016 Volkswagen Beetle, 2015 Volkswagen Beetle, 2014 Volkswagen Beetle, and 2013 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.

CAUTION:

Always follow the instructions regarding disconnecting and connecting the Battery -A-, refer to BATTERY, DISCONNECTING AND CONNECTING .

Removal

-- Disconnect the Battery -A-, refer to BATTERY, DISCONNECTING AND CONNECTING .

-- Press the catches in direction of the -arrow- and remove the cover from the E-box -1-.

Fig 1: Identifying E-Box Cover Catches

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Disconnect the wires -2-.

Fig 2: Remove/Install Relay And Fuse Panel Components

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the wires from the connecting pins.

-- Press the tabs -arrows- on the relay and fuse panel -1-.

Fig 3: Remove/Install Relay And Fuse Panel Components

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the relay and fuse panel -1- from the E-box.

Installation

Install in reverse order of removal. Note the following:

-- Connect the Battery -A-, refer to BATTERY, DISCONNECTING AND CONNECTING .

-- Then check whether the cover -1- of the E-box is correctly engaged.

Fig 4: Identifying E-Box Cover Catches

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Tightening Specifications

Refer to RELAY PANELS, FUSE PANELS AND E-BOX LOCATION OVERVIEW .