Fuse Panel Behind Driver Side Instrument Panel
WARNING: This page is about a different car, the 2016 Volkswagen Beetle, 2015 Volkswagen Beetle, 2014 Volkswagen Beetle, and 2013 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
Always follow the instructions regarding disconnecting and connecting the Battery -A-, refer to BATTERY, DISCONNECTING AND CONNECTING .
CAUTION:
- When removing and Installation components in visible area (switches, covers, trim, etc.), cover by taping the areas at which a prying tool (Trim Removal Wedge 3409, screwdriver) will be positioned using commercially available adhesive tape.
Removal
-- Disconnect the Battery -A-, refer to BATTERY, DISCONNECTING AND CONNECTING .
-- Open the fuse panel door on the driver side.
-- Remove the screws -1- and guide the fuse panel -2- downward.
Installation
Install in reverse order of removal. Note the following:
-- Connect the Battery -A-, refer to BATTERY, DISCONNECTING AND CONNECTING .
Tightening Specifications