Dimensions - Rear Lid Name Badges And Emblems

WARNING: This page is about a different car, the 2016 Volkswagen Beetle, 2015 Volkswagen Beetle, 2014 Volkswagen Beetle, and 2013 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.

NOTE:

There are different name badges depending on the market. The dimensions illustrated apply to all name badges.

The distance -dimension a- between the name badge and the emblem is different on the Sedan and Convertible.

Follow the installation instructions, refer to ASSEMBLY INSTRUCTIONS FOR BONDING NAME BADGES .

Fig 1: Dimensions - Rear Lid Name Badges And Emblems

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Mechanism with Emblem
Name badge

For Sedan only

Dimension -a- = 46 mm, from the bottom edge of the emblem to the upper edge of the name badge

For Convertible only

Dimension -a- = 49 mm, from the bottom edge of the emblem to the upper edge of the name badge

The name badge -2- is centered with the emblem -1- on the rear lid.