Entry Assist Release Cable A: Installing

WARNING: This page is about a different car, the 2016 Volkswagen Beetle, 2015 Volkswagen Beetle, 2014 Volkswagen Beetle, and 2013 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.

CAUTION:

Make sure the backrest is in its normal position. Move the backrest all the way forward using the handwheel.

-- Attach the entry assistance cable A -1- first to the seat forward/back adjustment -2- .

Fig 1: Disengage Entry Assistance Release Cable A -1- At Seat Forward/Back Adjuster -2- And Remove It

-- Engage the entry assistance cable A bracket -1- on the seat forward/back adjustment -2- .

Fig 2: Identifying Entry Assistance Release Cables

-- Connect the entry assistance release cable A -1- to the backrest hinge.

Fig 3: Disengage Entry Assistance Release Cable A -1- At Backrest Hinge

-- Position the entry assistance release cable A guides -2- on the lower seat frame.

-- Entry assistance release cable A, adjusting. Refer to FRONT SEAT ENTRY ASSISTANCE RELEASE CABLE A, ADJUSTING .

-- Lock the entry assistance release cable A -1- with the clip -2- .

Fig 4: Locking Entry Assistance Release Cable A -1- With Clip

Install in reverse order of removal.

When installing, make sure that the release cables -1- and -2- are routed as shown. Never cross the release cables!

Fig 5: Identifying Release Cables