LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2018 >> Beetle S, 2D Hatchback >> Repair and Diagnosis >> External Pages >> Different car >> Section 42 (2.0L - Engine Lubrication - Engine Code(S): CJAA & CVCA (Convertible)) >> 17 Engine Lubrication >> Removal And Installation >> Oil Pan >> Tightening Specifications

Tightening Specifications

WARNING: This page is about a different car, the 2015 Volkswagen Beetle, 2014 Volkswagen Beetle, and 2013 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:

After installing oil pan, allow sealant to dry for approximately 30 minutes. Only after then may the engine oil be replenished.

Assemble in reverse order of disassembly.

scientia non olet · About LEMON Manuals