Rear Axle Toe, Adjusting, Multi-Link Suspension
WARNING: This page is about a different car, the 2016 Volkswagen Beetle, 2015 Volkswagen Beetle, 2014 Volkswagen Beetle, and 2013 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.
Special tools and workshop equipment required
- Torque Wrench 40-200Nm VAG1332
-- Loosen nut -1-.
-- Adjust eccentric bolt -2- until specified value is reached.
-- Tighten the nut again.
Tightening Specifications
- Refer to SUBFRAME OVERVIEW .