LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2018 >> Beetle S, 2D Hatchback >> Repair and Diagnosis >> External Pages >> Different car >> Section 244 (Engine Assembly [CPLA,CPPA,CPKA,CPRA]) >> 10 Engine Assembly >> SUBFRAME Mount >> Transmission Mount, Removing And Installing >> Installing

Transmission Mount, Removing And Installing: Installing

WARNING: This page is about a different car, the 2017 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal and note the following:

-- Secure the transmission support to the longitudinal member.

-- Pull the transmission up using the spindle on the engine support bridge until the transmission comes into contact with the transmission mount support arm.

-- Check the adjustment of the subframe mount. Refer to SUBFRAME MOUNT, CHECKING ADJUSTMENT .

-- Remove the :10-222A  from the engine.

scientia non olet · About LEMON Manuals