LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2018 >> Beetle S, 2D Hatchback >> Repair and Diagnosis >> External Pages >> Different car >> Section 187 (Clutch - Manual Transmission 0A4 (Hatchback)) >> 30 Clutch >> Removal And Installation >> Mounting Bracket >> Tightening Specifications

Tightening Specifications

WARNING: This page is about a different car, the 2013 Volkswagen Beetle and 2012 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.
Component Nm
Mounting bracket to bulkhead:
  • Replace the self locking nuts
Refer to CLUTCH PEDAL OVERVIEW .
Impact bolster support to steering column bracket:
  • Replace the bolt
20