Coil Spring, Installing
WARNING: This page is about a different car, the 2016 Volkswagen Beetle, 2015 Volkswagen Beetle, 2014 Volkswagen Beetle, 2013 Volkswagen Beetle, and 2012 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.
-- Install the coil spring on the lower spring plate using the Spring Compressor VAG1752/1.
End of spring coil must rest against stop -arrow-.
-- Tighten new hex nut to piston rod.
-- Relieve the tension on the Spring Compressor VAG1752/1 and remove from the coil spring.
-- Suspension strut, installing. Refer to Installing .