Suspension Strut: Installing

WARNING: This page is about a different car, the 2016 Volkswagen Beetle, 2015 Volkswagen Beetle, 2014 Volkswagen Beetle, 2013 Volkswagen Beetle, and 2012 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal. Note the following:

-- Secure Engine/Gearbox Jack VAG1383A with Engine/Gearbox Jack Adapter - Wheel Hub Support T10149 to wheel hub using a wheel bolt.

Fig 1: Identifying Dimension Between Wheel Hub Center And Lower Edge Of Wheel Housing

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Position the suspension strut on the wheel bearing housing and secure it with the internal multi-point bolt and a new nut.

Socket head bolt tip must point in direction of travel.

-- Remove Spreader Tool 3424.