Entry Assist Release Cable A: Removing

WARNING: This page is about a different car, the 2016 Volkswagen Beetle, 2015 Volkswagen Beetle, 2014 Volkswagen Beetle, 2013 Volkswagen Beetle, and 2012 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the front seat. Refer to Removing

-- Remove the trim on the tunnel side. Refer to Removing .

-- Move the backrest forward as far as the stop using the handwheel.

-- Disengage the entry assistance cable A bracket -1- from the seat forward/back adjustment -2-.

Fig 1: Identifying Entry Assistance Release Cables

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Disengage the entry assistance release cable A -1- at the seat forward/back adjuster -2- and remove it.

Fig 2: Disengage Entry Assistance Release Cable A At Seat Forward/Back Adjuster And Remove It

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the entry assistance release cable A -1- from the backrest hinges.

Fig 3: Disengage Entry Assistance Release Cable A At Backrest Hinge

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the guides for the entry assistance release cable A -2- from the lower seat frame.