LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2018 >> Beetle S, 2D Hatchback >> Repair and Diagnosis >> External Pages >> Different car >> Section 174 (Seat Frames (Hatchback)) >> 72 Seat Frames >> Removal And Installation >> Front Seats >> Entry Assist Cable B >> Removing

Entry Assist Cable B: Removing

WARNING: This page is about a different car, the 2016 Volkswagen Beetle, 2015 Volkswagen Beetle, 2014 Volkswagen Beetle, 2013 Volkswagen Beetle, and 2012 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the front seat. Refer to Removing 

-- Remove the trim on the tunnel side. Refer to Removing .

-- Move the backrest forward as far as the stop using the handwheel.

-- Disengage the entry assistance cable B -3- for the seat forward/back adjustment -2-.

Fig 1: Identifying Entry Assistance Release Cables
GWWN72-10424Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the entry assistance cable B eyelets -3- from the seat rail bolts -arrow-.

-- Remove the backrest from the tunnel side.

-- Remove the entry assistance cable B eyelets -1- from the backrest hinges -arrow-.

Fig 2: Identifying Entry Assistance Cable B Eyelets
GWWM72-10039Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Press the tabs together -arrow- and remove the entry assistance cable B -1- from the backrest hinges.

Fig 3: Identifying Entry Assistance Cable B
GWWM72-10040Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the entry assistance cable B -1- through the slits for the backrest hinges.