Connecting Cable: Removing

WARNING: This page is about a different car, the 2016 Volkswagen Beetle, 2015 Volkswagen Beetle, 2014 Volkswagen Beetle, 2013 Volkswagen Beetle, and 2012 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.

WARNING: Follow the General Safety Precautions when working with airbags, belt tensioners and battery cut-out units (pyrotechnic components). Refer to SAFETY PRECAUTIONS .

-- Attach the Engine/Transmission Holder - Seat Repair Fixture VAS 6136 to the Engine and Transmission Holder VAS 6095.

-- Remove the front seat. Refer to Removing .

-- Secure the seat on the Engine/Transmission Holder - Seat Repair Fixture VAS 6136.

-- Remove the trim on the tunnel side. Refer to Removing .

-- Remove the backrest adjustment wheel. Refer to Removing .

-- Remove the seat height adjustment handle. Refer to Removing .

-- Remove the trim on the door sill side. Refer to Removing .

-- Remove the backrest. Refer to Removing .

-- Remove the entry assistance trim panel. Refer to Removing .

-- Remove the cover and the front seat backrest padding. Refer to BACKREST COVER AND CUSHION .

-- Tilt the bracket -arrow- up as far as the stop and hold it in that position.

Fig 1: Pushing Bracket Up As Far As Stop

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Unhook the connecting cable -1- from the bracket -2-.

-- Push the handle -1- all the way forward.

Fig 2: Disengage Connecting Cable At Handle

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the connecting cable -2- from the handle.

-- Remove the connecting cable.