LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2018 >> Beetle S, 2D Hatchback >> Repair and Diagnosis >> External Pages >> Different car >> Section 162 (2.0L - Cylinder Head & VALVETRAIN - Engine Code: CVCA (Hatchback)) >> 15 Cylinder Head, VALVETRAIN >> Removal And Installation >> Valve Stem Seals >> Valve Stem Seals, Cylinder Head Installed >> Assembling

Valve Stem Seals, Cylinder Head Installed: Assembling

WARNING: This page is about a different car, the 2015 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.

Assembly is performed in the reverse order of disassembly, noting the following:

-- Make sure all the roller rocker levers lie on the ends of the valve stems correctly and are clipped onto the respective hydraulic adjusting elements.

-- Install the camshaft housing, refer to Installing .

-- Install the glow plugs, refer to GLOW PLUG .

scientia non olet · About LEMON Manuals