LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2018 >> Beetle S, 2D Hatchback >> Repair and Diagnosis >> External Pages >> Different car >> Section 162 (2.0L - Cylinder Head & VALVETRAIN - Engine Code: CVCA (Hatchback)) >> 15 Cylinder Head, VALVETRAIN >> Diagnosis And Testing >> Camshaft, Measuring Axial Clearance >> Procedure

Camshaft, Measuring Axial Clearance: Procedure

WARNING: This page is about a different car, the 2015 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the camshaft housing, refer to Removing .

-- Secure the Dial Gauge - 0-10 mm VAS 6079 on the camshaft housing with the Dial Gauge Holder VW 387 as shown.

-- Press the camshaft against the dial gauge by hand.

-- Set dial gauge to "0".

-- Press the camshaft off the dial gauge and read the value:

scientia non olet · About LEMON Manuals