Throttle Valve Control Module -J338-: Installing
WARNING: This page is about a different car, the 2015 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.
Install in reverse order of removal. Note the following:
- Tightening specification, refer to OVERVIEW - INTAKE MANIFOLD
NOTE:
Replace seals, and O-ring after removing.
-- When installing the connection with the Throttle Valve Control Module - J338-, pay attention to the alignment pins.
-- Install the front upper coolant pipes, refer to OVERVIEW - COOLANT PIPES .
-- Install the air filter housing, refer to INSTALLING .
-- Install the engine cover, refer to ENGINE COVER .