LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2018 >> Beetle S, 2D Hatchback >> Repair and Diagnosis >> External Pages >> Different car >> Section 148 (2.0L - Fuel Mixture Preparation & Fuel Injection - Engine Code(S): CJAA & CVCA (Hatchback)) >> 23 Fuel Mixture Preparation, Fuel Injection >> Removal And Installation >> Fuel Pressure Sensor -G247- >> Function

Fuel Pressure Sensor -G247-: Function

WARNING: This page is about a different car, the 2015 Volkswagen Beetle, 2014 Volkswagen Beetle, and 2013 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.

The Fuel Pressure Sensor -G247- (rail pressure sensor) is located in the rail element (high pressure reservoir). It measures the current fuel pressure in the high pressure system and delivers a voltage signal to the Engine Control Module -J623-.

If the Fuel Pressure Sensor -- malfunctions, the pressure is controlled via an Engine Control Module -- characteristic map (maximum engine speed is limited to approximately 3000 RPM in emergency operation mode).

CAUTION:

Always follow these instructions before and during work.