General Repair Information
WARNING: This page is about a different car, the 2015 Volkswagen Beetle, 2014 Volkswagen Beetle, and 2013 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.
Complete the following steps before starting work on the fuel supply system:
- Before starting work, place the extracting hose on an exhaust extractor that is switched on near the fuel tank assembly opening.
- This extracts the fuel vapors.
- If no exhaust extraction system is available, a radial fan (as long as motor is not in air flow) with a displacement greater than 15 m3 /h can be used.
- Do not let fuel come in contact with bare skin. Wear fuel-resistant gloves.
- Disable the current to the Transfer Fuel Pump -G6-, refer to appropriate Wiring Diagram.
- Drain the fuel tank. Refer to FUEL TANK, DRAINING .