LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2018 >> Beetle S, 2D Hatchback >> Repair and Diagnosis >> External Pages >> Different car >> Section 108 (2.0L - Crankshaft Drive - Engine Code(S): CJAA & CVCA (Convertible)) >> 13 Crankshaft Drive >> Removal And Installation >> Sealing Flange Transmission Side >> Tightening Specifications

Tightening Specifications

WARNING: This page is about a different car, the 2015 Volkswagen Beetle, 2014 Volkswagen Beetle, and 2013 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.
Component Tightening Specification
Sealing flange bolts
  • Replace
  • Tighten while alternating diagonally
 15 Nm
Engine Speed Sensor -G28- 5 Nm
Flywheel
  • Replace
 60 Nm +90°
Transmission Refer to REMOVAL AND INSTALLATION .
Oil Pan Refer to OIL PAN/OIL PUMP OVERVIEW .
scientia non olet · About LEMON Manuals