LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2017 >> Golf S, Eng CD CXBA, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 18 (Transmission System (Gears & Shafts - Service Information - 6-Speed Manual - 02Q)) >> 35 Gears, Shafts >> Output Shaft >> Overview - Output Shaft >> Overview - Output Shaft, 1ST To 4TH Gears >> Differentiation of Output Shafts

Differentiation of Output Shafts

WARNING: This page is about a different car, the 2017 Volkswagen GTI, 2016 Volkswagen GTI, 2015 Volkswagen Golf, and 2015 Volkswagen GTI. However, it is still accessible from the selected car via links, so may be relevant.
GWWA35-10498Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
Output Shaft -1- with Reinforcement Measures -1- without Reinforcement Measures
Dimension -a- 40.1 mm 42.0 mm
-Arrow A- Groove for collar bushing position -item 21-  OVERVIEW - OUTPUT SHAFT, 1ST TO 4TH GEARS List Item:Collar Bushing -
-Arrow B- - Two opposite holes and circular groove for the thrust washer mounts -item 19-  OVERVIEW - OUTPUT SHAFT, 1ST TO 4TH GEARS List Item:Thrust Washer
scientia non olet · About LEMON Manuals