LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2017 >> Golf S, Eng CD CXBA, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 18 (Transmission System (Gears & Shafts - Service Information - 6-Speed Manual - 02Q)) >> 35 Gears, Shafts >> Output Shaft >> Output Shaft, Disassembling And Assembling >> Output Shaft, 5TH, 6TH And Reverse Gears, Disassembling And Assembling >> Remove the Inner Race/Tapered Roller Bearing on the Side of the Transmission Housing

Remove the Inner Race/Tapered Roller Bearing on the Side of the Transmission Housing

WARNING: This page is about a different car, the 2017 Volkswagen GTI, 2016 Volkswagen GTI, 2015 Volkswagen Golf, and 2015 Volkswagen GTI. However, it is still accessible from the selected car via links, so may be relevant.
GWWN35-0256Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Note the following before installing the Tapered Roller Bearing Puller: 

-- Remove the inner race/tapered roller bearing locking ring on the side facing the transmission housing.

-- Place the : VW431  and : 40-105  on the output shaft.

scientia non olet · About LEMON Manuals