LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2017 >> Golf S, Eng CD CXBA, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 18 (Transmission System (Gears & Shafts - Service Information - 6-Speed Manual - 02Q)) >> 35 Gears, Shafts >> Output Shaft >> Output Shaft, Disassembling And Assembling >> Output Shaft, 5TH, 6TH And Reverse Gears, Disassembling And Assembling >> Installing the Outer Race/Tapered Roller Bearing in the Clutch Housing

Installing the Outer Race/Tapered Roller Bearing in the Clutch Housing

WARNING: This page is about a different car, the 2017 Volkswagen GTI, 2016 Volkswagen GTI, 2015 Volkswagen Golf, and 2015 Volkswagen GTI. However, it is still accessible from the selected car via links, so may be relevant.
GWWN35-0270Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Place the washer under the outer race.

-- Support the clutch housing with the :40-20  directly under the bearing mount.

scientia non olet · About LEMON Manuals