LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2017 >> Golf S, Eng CD CXBA, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 18 (Transmission System (Gears & Shafts - Service Information - 6-Speed Manual - 02Q)) >> 35 Gears, Shafts >> Output Shaft >> Output Shaft, Disassembling And Assembling >> Output Shaft, 5TH, 6TH And Reverse Gears, Disassembling And Assembling >> Disassembling and Assembling Locking Collar and Synchronizer Hub for 5th and 6th Gears

Disassembling and Assembling Locking Collar and Synchronizer Hub for 5th and 6th Gears

WARNING: This page is about a different car, the 2017 Volkswagen GTI, 2016 Volkswagen GTI, 2015 Volkswagen Golf, and 2015 Volkswagen GTI. However, it is still accessible from the selected car via links, so may be relevant.
GWWV35-1142Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- To disassemble, remove the springs -1-.

  1. Spring
  2. Locking piece
  3. Locking Collar
  4. Synchronizer Hub

-- Slide the locking collar over the synchronizer hub.

scientia non olet · About LEMON Manuals