LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2017 >> Golf S, Eng CD CXBA, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 18 (Transmission System (Gears & Shafts - Service Information - 6-Speed Manual - 02Q)) >> 35 Gears, Shafts >> Output Shaft >> Output Shaft, Disassembling And Assembling >> 1ST To 4TH Gear Output Shaft, Disassembling And Assembling >> Warming and Installing the Synchronizer Hub with Locking Collar for 3rd and 4th Gears

Warming and Installing the Synchronizer Hub with Locking Collar for 3rd and 4th Gears

WARNING: This page is about a different car, the 2017 Volkswagen GTI, 2016 Volkswagen GTI, 2015 Volkswagen Golf, and 2015 Volkswagen GTI. However, it is still accessible from the selected car via links, so may be relevant.
GWWN35-0248Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Turn the 4th gear synchronizer ring so that the grooves line up with the locking pieces.

-- Install the circlip.

scientia non olet · About LEMON Manuals