1ST To 4TH Gear Output Shaft, Disassembling And Assembling: Notes
WARNING: This page is about a different car, the 2017 Volkswagen GTI, 2016 Volkswagen GTI, 2015 Volkswagen Golf, and 2015 Volkswagen GTI. However, it is still accessible from the selected car via links, so may be relevant.
Special tools and workshop equipment required
- Press Plate:VW401
- Press Plate:VW402
- Press Piece - Rod:VW407
- Press Piece - Rod:VW408A
- Press Piece - Multiple Use:VW412
- Press Piece - 60mm:VW415A
- Holding Plate:VW309A
- Holding Fixture:VW313
- Transmission Support:VW353
- Press Piece - Multiple Use:VW431
- Press Piece - Multiple Use:VW433
- Press Piece - Multiple Use:VW454
- Press Piece - Multiple Use:VW512
- Press Piece - 42mm:VW516
- Press Piece - Multiple Use:VW519
- Slide Hammer Set:VW771
- Crankshaft Holding Fixture:VW801
- Press Piece - Multiple Use:40-105
- Bearing Installer - Multiple Use:40-20
- Bearing Installer - Differential Bearing:40-21
- Slide Hammer - Press Plate:2050
- Holding Fixture - Spacers:VW540/1B
- Puller - Taper Roller Bearing:VAG1582
- Puller - Taper Roller Bearing - Adapter 7:VAG1582/7
- Inductive Heater:VAS6414
- -1- Internal Puller:VAS251615 (21-7)
- -1- Puller - Roller Bearing:VAS6775 (21-8)
- -2- Puller:VAS251419 (18-2)
- -3- Splitter:VAS251411 (17-2)
- -4- Counter Support:VAS251623 (22-2)