Installing the 3rd Gear Wheel with Needle Bearing
WARNING: This page is about a different car, the 2017 Volkswagen GTI, 2016 Volkswagen GTI, 2015 Volkswagen Golf, and 2015 Volkswagen GTI. However, it is still accessible from the selected car via links, so may be relevant.
- The synchronizer ring -1- and the tabs -arrow A- are inside the openings in the synchronizer hub -2-.
The pins -arrows B- in the outer race lock in the recesses -arrows C- in the gear wheel -3-.
NOTE:
Pressing on inner race/tapered roller bearing. Refer to Installing the Inner Race/Tapered Roller Bearing on the Side of the Transmission Housing .
Selecting the locking ring for the inner race/tapered roller bearing. Refer to Selecting the Circlip .