Installing 1st Gear Wheel with Needle Bearing
WARNING: This page is about a different car, the 2017 Volkswagen GTI, 2016 Volkswagen GTI, 2015 Volkswagen Golf, and 2015 Volkswagen GTI. However, it is still accessible from the selected car via links, so may be relevant.
- The synchronizer ring -1- and the tabs -arrow A- are inside the openings in the synchronizer hub -2-.
The pins -arrows B- in the outer race lock in the recesses -arrows C- in the gear wheel -3-.
-- Install the 1st and 4th gear thrust washers in the output shaft -item 19- OVERVIEW - OUTPUT SHAFT, 1ST TO 4TH GEARS List Item:Thrust Washer and -item 20- OVERVIEW - OUTPUT SHAFT, 1ST TO 4TH GEARS List Item:Retaining Ring.