LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2017 >> Golf S, Eng CD CXBA, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 18 (Transmission System (Gears & Shafts - Service Information - 6-Speed Manual - 02Q)) >> 35 Gears, Shafts >> Output Shaft >> Output Shaft, Disassembling And Assembling >> 1ST To 4TH Gear Output Shaft, Disassembling And Assembling >> Inner Friction Surface on 1st Gear Outer Race, 2nd Gear Outer Race and 3rd Gear Outer Race, Checking for Wear

Inner Friction Surface on 1st Gear Outer Race, 2nd Gear Outer Race and 3rd Gear Outer Race, Checking for Wear

WARNING: This page is about a different car, the 2017 Volkswagen GTI, 2016 Volkswagen GTI, 2015 Volkswagen Golf, and 2015 Volkswagen GTI. However, it is still accessible from the selected car via links, so may be relevant.
GWWS35-0371Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Install the inner race -1- on the cone on the gear wheel.

-- Install the outer race -2- on the cone on the inner race. Measure the gap -a- with a feeler gauge at 3 locations at 120°.

-- Note the average value.

Wear Limit Dimension -a-
1st gear, 2nd gear, and 3rd gear 0.4 mm
scientia non olet · About LEMON Manuals