Checking the 4th Gear Synchronizer Ring for Wear
WARNING: This page is about a different car, the 2017 Volkswagen GTI, 2016 Volkswagen GTI, 2015 Volkswagen Golf, and 2015 Volkswagen GTI. However, it is still accessible from the selected car via links, so may be relevant.
| -A- = Brass Synchronizer Ring | ||
|---|---|---|
| Gap Dimension -a- | Installation Dimension | Wear Limit |
| 4th Gear | 1.0 to 1.7 mm | 0.5 mm |
| -B- = Steel Plate Synchronizer Ring | ||
|---|---|---|
| Gap Dimension -a- | Installation Dimension | Wear Limit |
| 4th Gear | 1.3 to 2.4 mm | 0.8 mm |
-- Press synchronizer ring onto taper of the gear wheel and measure gap dimension -a- using a feeler gauge.