LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2017 >> Golf S, Eng CD CXBA, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 18 (Transmission System (Gears & Shafts - Service Information - 6-Speed Manual - 02Q)) >> 35 Gears, Shafts >> Input Shaft >> Input Shaft, Disassembling And Assembling >> Removing the Cylindrical Roller Bearing from the Clutch Housing

Removing the Cylindrical Roller Bearing from the Clutch Housing

WARNING: This page is about a different car, the 2017 Volkswagen GTI, 2016 Volkswagen GTI, 2015 Volkswagen Golf, and 2015 Volkswagen GTI. However, it is still accessible from the selected car via links, so may be relevant.
GWWN35-10006Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Compress the cylindrical roller bearing locking ring -arrow- with pliers -C- and remove it.

A -:VAS251623  (22-2)

B -:VAS251611  (21-5)

scientia non olet · About LEMON Manuals