Input Shaft, Disassembling And Assembling: Notes
WARNING: This page is about a different car, the 2017 Volkswagen GTI, 2016 Volkswagen GTI, 2015 Volkswagen Golf, and 2015 Volkswagen GTI. However, it is still accessible from the selected car via links, so may be relevant.
Special tools and workshop equipment required
- Press Plate:VW401
- Press Plate:VW402
- Press Piece - Rod:VW407
- Press Piece - Rod:VW408A
- Press Piece - Rod:VW412
- Press Piece - Multiple Use:VW454
- Press Piece - Bushing - 50mm Diameter:VW432
- Bearing Installer - Multiple Use:32-111
- Inductive Heater:VAS6414
- -1- Internal Puller:VAS251611 (21-5)
- -3- Splitter:VAS251411 (17-2)
- -4- Counter Support:VAS251623 (22-2)
- Feeler Gauge
CAUTION:
This procedure contains mandatory replaceable parts. Refer to component overview prior to starting procedure.
Mandatory Replacement Parts
- Grooved Ball Bearing - Input Shaft