Transmission Housing, Servicing: Notes
WARNING: This page is about a different car, the 2017 Volkswagen GTI, 2016 Volkswagen GTI, 2015 Volkswagen Golf, and 2015 Volkswagen GTI. However, it is still accessible from the selected car via links, so may be relevant.
Special Tools And Workshop Equipment Required
- Bearing Driver - Multiple Use:VW244B
- Transmission Support:VW353
- Press Plate:VW401
- Press Plate:VW402
- Press Piece - Rod:VW407
- Press Piece - 37mm:VW416B
- Guide Pin:VW436A
- Press Piece - Guide Pin:VW439
- Slide Hammer Set:VW771
- Crankshaft Holding Fixture:VW801
- Guide Pins:10-15
- Press Piece - Pivot Mount Bushing:3124
- Bearing Installer - Crankshaft Pilot Bearing:3264
- Subframe Support Tool:3290
- Torque Wrench 1331 5-50 Nm :VAG1331
- Bushing Driver - Selector Shaft:T10168
- Locking Sleeve Drift:T10169 or Locking Sleeve Drift:T10362 . Refer to Lock Sleeve Differentiation
- Breather Tube Tool:T10203
- -1- Internal Puller:VAS251605 (21-2)
- -1- Internal Puller:VAS251609 (21-4)
- -4- Counter Support:VAS251623 (22-2)
- Thread adapter from Counter Support:VAS251621 (22-1)