LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2017 >> Golf S, Eng CD CXBA, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 10 (Transmission System (Controls & Housing - Service Information - 6-Speed Manual - 02Q)) >> 34 Controls, Housing >> Transmission Housing And Clutch Housing >> Transmission Housing, Servicing >> Installing The Needle Sleeve A Into The Transmission Housing

Installing The Needle Sleeve A Into The Transmission Housing

WARNING: This page is about a different car, the 2017 Volkswagen GTI, 2016 Volkswagen GTI, 2015 Volkswagen Golf, and 2015 Volkswagen GTI. However, it is still accessible from the selected car via links, so may be relevant.
GWWN34-1010Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Lay the reverse shaft thrust washer -B- on the needle sleeve while pressing it in.

-- Support the transmission housing with the :VW416B  directly under the bearing mount.

scientia non olet · About LEMON Manuals