Transmission Fluid, Draining
Transmission Fluid.
-- Remove the entire air filter housing if it is located above the locking bolt for the selector shaft.
Vehicles With Turbo Diesel Engine
-- Refer to AIR FILTER HOUSING, REMOVING AND INSTALLING [FOR ENGINE(S) CRUA] .
Vehicles With Gasoline Engine
-- Refer to AIR FILTER HOUSING, REMOVING AND INSTALLING [FOR ENGINE(S) CNSB, CNSA, CXBB, CXBA, CXCB, CXCA] .
Continuation For All
-- Remove the noise insulation. Refer to OVERVIEW - NOISE INSULATION .
Clean The Transmission.
Use a clean container that holds 3 liters with a scale printed on it to catch the transmission fluid.
-- Drain the transmission fluid, by removing the fluid drain plug -arrow-.
-- Install the oil drain plug. Refer to FLUID FILLER OR DRAIN PLUG TIGHTENING SPECIFICATION .