Overview - Bevel Box: Notes
WARNING: This page is about a different car, the 2017 Volkswagen GTI, 2016 Volkswagen GTI, 2015 Volkswagen Golf, and 2015 Volkswagen GTI. However, it is still accessible from the selected car via links, so may be relevant.
- Bolt
- Tightening Specification. Refer to OVERVIEW - DIFFERENTIAL, AWD AND FWD WITH FRONT AXLE DIFFERENTIAL LOCK .
- Heat Shield
- Nut
- Tightening specification. Refer to OVERVIEW - DRIVE AXLE and/or OVERVIEW - DRIVE AXLE .
- Quantity: 2 or 3
- Bolt
- Tightening specification. Refer to DRIVESHAFT, REMOVING AND INSTALLING .
- For the heat shield at the bevel box
- Heat Shield
- For driveshaft
- Bolt
- Tightening specification. Refer to DRIVESHAFT, REMOVING AND INSTALLING .
- For the heat shield at the bevel box
- Bevel Box
- Removing. Refer to BEVEL BOX, REMOVING .
- Installing. Refer to BEVEL BOX, INSTALLING .
- Bolt
- Tightening Specification. Refer to OVERVIEW - DIFFERENTIAL, AWD AND FWD WITH FRONT AXLE DIFFERENTIAL LOCK .
- Replace after removing
- Quantity: 4
- Transmission Support
- There are different versions.
- Bolt
- Tightening specification and sequence. Refer to Tightening Specification and Sequence for Bevel Box Transmission Support .
- Transmission support to bevel box
- Quantity: 2
- Bolt
- Tightening specification and sequence. Refer to Tightening Specification and Sequence for Bevel Box Transmission Support .
- Transmission support to engine
- Quantity: 2